Spray Drying Equipment

Spray Drying Equipment 1 Stainless steel 304 316l 2 GMP standard 3 Free assembly service

Spray Drying Equipment

1 Stainless steel 304 316l 2 GMP standard 3 Free assembly service

Principle of work: raw material is fed into the machine from the inlet and moves forward continuously along with the level of fluidized-bed under the action of vibration. The hot air passes through fluidized-bed and carries out heat exchanging with damp raw material. Then the damp air is exhausted out through cyclone separator and duster, and the dry raw material is discharged through discharge outlet.

Technical parameters:

Model(LDR)	Fluid bed	Inlet Temp	Outlet Temp	Capacity of vaporized moisture (kg/h)	Vibration Motor
					Model	Power (kw)
3×0.30	0.9	70-140	40-70	20-35	ZDS31-6	0.8×2
4.5×0.30	1.35	70-140	40	35-50	ZDS31-6	0.8×2
4.5×0.45	2.025	70-140	40	50-70	ZDS32-6	1.1×2
4.5×0.60	2.7	70-140	40	70-90	ZDS32-6	1.1×2
6×0.45	2.7	70-140	40	80-100	ZDS41-6	1.5×2
6×0.60	3.6	70-140	40	100-130	ZDS41-6	1.5×2
6×0.75	4.5	70-140	40	120-140	ZDS42-6	2.2×2
6×0.90	5.4	70-140	40	140-170	ZDS42-6	2.2×2
7.5×0.60	4.5	70-140	40	130-150	ZDS42-6	2.2×2
7.5×0.75	5.625	70-140	40	150-180	ZDS51-6	3.0×2
7.5×0.90	6.75	70-140	40	160-210	ZDS51-6	3.0×2
7.5×1.2	9	70-140	40	200-260	ZDS51-6	3.0×2

Spray Drying Equipment